Hotline:15098991508

双击可放大

Medical mask synthetic blood penetration tester

   Medical mask synthetic blood penetration tester, used for the synthetic blood penetration test of medical masks.

Online consultation
Consultation hotline:0531-88691870

Product Introduction / Product introduction

Principle of HCXY Synthetic Blood Penetration Tester

Test procedure: The sample was fixed on the sample fixture of the instrument, and 2ml of synthetic blood with surface tension of 0.042±0002n/m was sprayed horizontally to the target area of the measured sample at a distance of 30.5cm from the center of the sample at a pressure of 16kpa from a needle with an inner diameter of 0.84mm. Remove for visual inspection within 10 seconds.


Technical description of HCXY synthetic blood penetration tester

(1) Product characteristics

1. The equipment is equipped with air pump to adjust the air pressure.

2, the detector is configured with a positive pressure sensor for the collection of test data pressure.

3, the pressure has a stepless adjustable function, can set the pressure holding time and other technical parameters.


(2) Technical parameters

Product name

Synthetic blood penetration tester

Product model

HCXY

Basic principle

Simulated breathing was carried out through the vacuum pump and the pressure difference was detected


Test pressure

0-20KPa

Micromanometer range

0-0.1KPa

Pressure resolution

0.1kPa

Time accuracy

0.1s

Test medium

Synthetic blood

Control mode

manual

Blood volume

2ml

Scope of application

Surgical mask

Standard configuration

a host, a set of liquid storage tank, a set of testing equipment

By Test Item
copyright:Jinan Millay Instrument Co., Ltd 备案号:鲁ICP备19023336号-1
Online customers
Service Phone

Service Phone

0531-88691870

WeChat consultation
Back to top