Test principle
The test surface of two samples is placed together horizontally relative to each other. Under a certain contact pressure, the two surfaces move relative to a certain displacement at a constant speed, and the force required in the process is recorded. The friction coefficient is obtained by dividing the measured force value by the gravity of the slider.
Technical characteristics
7 inch LCD touch screen display, one key operation, the system can simultaneously measure the static friction coefficient and dynamic friction coefficient of the sample
National standard requires automatic timing of standing time to ensure full contact between samples,
The equipment has automatic zero clearing function before test to improve the accuracy of test results
The test data and result curve are displayed in real time during the test
Instrument test table and test slider are non-magnetic materials to reduce the system test error
The test parameters, results and curves can be displayed on the large LCD screen for easy inquiry and operation
Meet the requirements of national standards, American standards, ISO and other standards, one click to switch different standard test modes
System accessories using precision components, the test results repeatability is good
Built-in micro printer, can realize real-time, historical data printing
The test speed can be set and adjusted; Support any slider quality test, support any thickness sample test
Standard RS232 interface, convenient system and computer external connection and data transmission
Industry application
Scope of application | Plastic film | Suitable for testing dynamic and static friction coefficient of plastic film and sheet |
paper | Suitable for paper and board dynamic and static friction coefficient test |
rubber | Suitable for testing static friction coefficient and dynamic friction coefficient of rubber |
Aluminum foil, composite film, metal products | Applicable to aluminum foil, aluminum foil composite film, metal products static friction coefficient and dynamic friction coefficient test |
Printed matter | Suitable for static friction coefficient and dynamic friction coefficient test of printed matter |
Technical parameter
Load range: 0 ~ 5N (other ranges are optional)
Test accuracy: 0.2%FS
Stroke: 300mm
Test speed: 100mm/min (adjustable)
Sample height: 0 ~ 20mm
Slider mass: 200g, 500g
Dimensions: 510mm (L) X315mm (B) X230mm (H)
Power supply: AC220V50Hz
Net weight: 20kg
Test standard
GB10006, ISO8295
Product configuration
Standard configuration: host, micro printer, 200g slider
Optional: Professional software, communication cable, 500g slider
